Posts: 15
Threads: 4
Joined: May 2020
Country:
I have a Pro2 Compact which is working great with the TX! So I've put in the correct WU station ID and password in Credentials.h, and changed ENABLE_WU_UPLOAD to "1" in Config_Options.h, but still nothing is being sent to Weather Underground. The middle "led" in the top left of the RX display is red, which I think indicates it isn't in contact with Wunderground. What can I do to get this to connect?
Posts: 798
Threads: 27
Joined: May 2015
Weather Station: WeatherDuino Pro2
Country:
Have you put your router details into credentials:
WiFi Credentials
// --------------------------------------------------------------------------------------
const char* WIFI_SSID = "ABCD_DEF_34";
const char* WIFI_PASSWORD = "12345678";
Check SSID especially
Posts: 15
Threads: 4
Joined: May 2020
Country:
Yes, the rx is connected to the Wifi no problem, I can see the weather at "ip.address/weather" and I've put the station key in the password, not my wunderground password
Posts: 5.358
Threads: 333
Joined: Apr 2014
Weather Station: WeatherDuino 4Pro
Country:
Hi,
Please check if you are using the latest ESP8266 board manager, which is 2.7.1. If not, upgrade the boards manager.
Don't forget to choose as Flash size 4M(FS:1Mb OTA ... )
After upgrading boards manager you need to upload the fonts and icons again, using the ESP866 Sketch Data Upload.
Now compile the code and upload it the usual way.
Rgs.