Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Wunderground is having problems with the servers.
#11

Have we had an update from Weather Underground about their server issues? Has everything been repaired?

I ask this because I can not seem to get any Air Quality information to display on my Weather Underground page following the Werk_AG's announcement of this automatic feature on 20 Jan 2018:

http://www.meteocercal.info/forum/Thread...nderground

Is there some setting I need to change on my Weather Underground account for this data to be displayed publicly or are their server issues causing this to be a problem? Or maybe this is not a feature for New Zealand yet?

I have disabled Cumulus software from automatically updating and am relying only on the Pro2 receiver to send data to Weather Underground. I also am not able to get soil data displayed on their site either. 

My Weather Underground page is:
https://www.wunderground.com/personal-we...=IMANAWAT7

Thanks for any ideas,
Palmy Wather
Reply
#12

same problem, I have the latest versions but the air quality does not appear on wunderground.
Reply
#13

My Air Quality data has finally started showing up on WeatherUnderground, but it is only displaying "PM 2.5 (ug/m3)".

I think the main reason it wasn't displaying any data in the first place was because I had Cumulus AND the Pro2 system uploading data, but Cumulus did not include Air Quality information; confusing WeatherUnderground.

I will give it some more time and hopefully more data will start showing like PM 10 (ug/m3).
Reply
#14

(13-02-2018, 00:42)Palmyweather Wrote:  I will give it some more time and hopefully more data will start showing like PM 10 (ug/m3).

Current software version isn't uploading PM10 data to WU yet. It will be added on next software release.
Check you inbox, I sent you a PM regarding this matter.



Reply
#15

is there an evolution for the display of PM2.5 and PM10 on wunderground?
I have the version 2PLUS-v5.0_b002 and no value go back to WU.
thanks
Reply
#16

Weatherduino version 2PLUS-v5.0_b002 is uploading PM2.5 fine, next release will upload PM10 too.

You can check it at PalmyWeather WU pages:
https://www.wunderground.com/personal-we...=IMANAWAT7



Reply
#17

(24-02-2018, 23:44)f4aii Wrote:  I have the version 2PLUS-v5.0_b002 and no value go back to WU.

If I recall correctly (going by Palmy's post) it takes a while before it begins to show up.

As a side note, I've just enabled uploading to WU on my x2+ so it will be interesting to see when my data shows also.
Reply
#18

Don't forget to disable Cumulus upload to WU, otherwise PM2.5 will never show up.



Reply
#19

I use cumulus to have the weather in real time, every 5 seconds so it's not compatible.
I also have a wifi instability on the weatherduino, it loses the connection very quickly despite the fact that the router is 3m without obstacles, I have not yet found what it is. This is the second router I am testing. The two cut after a few hours from where my use of a raspberry coupled with cumulus.
Reply
#20

Cool, my data is now showing on WU!
Reply




Users browsing this thread: 1 Guest(s)