[Palmyweather]

Implementing a limitation to 100% it's easy. In next software release, I will implement a check to limit the display value to 100%

Hi there

Could I make an additional suggestion for limit checking in future updates?

Today I needed to briefly unplug my temperature sensor, forgetting to turn off the transmitter. When I checked the display, the temperature had dropped from a nice +25*C to a chilly -40*C which also when though and logged onto my weather station website.

I know it was my own fault for not turning off the transmitter first, but could there be coded protection in the receiver unit that assesses the new temperature reading from the transmitter and says for example "the last value was +25*C, it simply can not drop to -40*C in the next instant, therefore ignore the last reading". This would also help limit any spikes from the cable on the temperature sensor or missed data packets.

I must say however, the new humidity limiting code worked well and stopped it from reading from over 100% while I was undertaking my maintenance.

Just a thought anyway.