[werk_ag]

Hi Darryl

Thanks for the good news, it's always a pleasure to know that a new system is about to be born.

All I see in the configuration options seems right.
Maybe I have not got it right. Are you trying to tell me that you only see the data from your DHT22 in the Extra Sensors window?
The same data (with better precision) isn't show in Cumulus as outside temp / hum?

Yes That is right on the main page of cumulus shows no Temperature and Humidity and on Display (TFT) on the RX board does not show any External Data. I see the indoor Temperature and Humidity on the display. I don't see the outside Temperature and Humidity on the Display. It Shows 0.0 for Both.

Hope this helps.

Darryl

I'm surprised! I will check if anything is wrong with the code for the DHT22. Are you sure that the compiled code have this line with a value of 1?

#define TH_OutSensor 1 // 0 for SHT21 or HTU21D sensor, 1 for SHT1x or DHT22 sensor,

and this one, with the value 0?

#define TH_OutUnit 0 // 0 for Temp/Hum sensor connected to TX_Unit 0, 1 for Temp/Hum sensor connected to TX_Unit 1