09-04-2022, 23:03
Hi Steve,
You don't have to wait too much, just download v1.0_b005 which has been published a few minutes ago.
Let me know if it works as I think you need, which is having Metric units for Temperature (ºC) and Imperial for the Wind speed (mph).
If this is the way you have on the WeatherDuino receiver, then it should be the same way on the Weather Cube, unless I did something wrong.
Due to the rounded shape of the front and back panel, these parts aren't the easiest type of 3D objects to print, which makes me tell that you and your printer did a very good job, specially being the first print.
Congratulations.
(09-04-2022, 09:54)SR123 Wrote: Great, I will wait for the new firmware (case 1)
You don't have to wait too much, just download v1.0_b005 which has been published a few minutes ago.
Let me know if it works as I think you need, which is having Metric units for Temperature (ºC) and Imperial for the Wind speed (mph).
If this is the way you have on the WeatherDuino receiver, then it should be the same way on the Weather Cube, unless I did something wrong.
(09-04-2022, 09:54)SR123 Wrote: The enclosure is the first 3D print I have ever done! The printer (a Creality Ender 3 v2) got delivered at Lunchtime, assembled in the afternoon and printed that evening - I am really impressed with it.
Due to the rounded shape of the front and back panel, these parts aren't the easiest type of 3D objects to print, which makes me tell that you and your printer did a very good job, specially being the first print.
Congratulations.