[hornychz]

I believe I found the problem, hopefully I will solve it up to next weekend. I may need some help from Jarek and Zdenek to tell me the exact range of extended chars used on Polish an Czech. I will send a PM to both about this matter.

engolling: The problem is more prone to happen with the Pro2 PLUS than with the WD units.

OK. I am ready. 

[jarekh3]

I'm ready too 

[werk_ag]

Thank you both.

Please just wait one or two days, currently I'm very busy with my job.

[hornychz]

Thank you both.

Please just wait one or two days, currently I'm very busy with my job.

That was three hours, not two days! 

[werk_ag]

Jarek and Zdenek

When possible please try latest software, released today.

Please note:

This version includes a fork of the original DarkSkyWeather library, which was been optimized for the WeatherDuino system.
On the new software version, two minutes after you go to the 4 Days Forecast view, system automatically returns to Main view.

Before compiling:

- Install the new WD_DarkSkyWeather library
- Update the JSON_Decoder-master library
- Update the TFT_eSPI library (included version is compatible with all WeatherDuino software and other software, so you can safely replace any installed version).
- Update the RadioHead library (included version is compatible with all WeatherDuino software and other software, so you can safely replace any installed version).

- VERY IMPORTANT - Upload the fonts and icons to SPIFFS memory by using the “ESP8266 Sketch Data Upload” menu option in the Arduino IDE.

Waiting for your feedback.
Rgs.

[hornychz]

Jarek and Zdenek

When possible please try latest software, released today.

Please note:

This version includes a fork of the original DarkSkyWeather library, which was been optimized for the WeatherDuino system.
On the new software version, two minutes after you go to the 4 Days Forecast view, system automatically returns to Main view.

Before compiling:

- Install the new WD_DarkSkyWeather library
- Update the JSON_Decoder-master library
- Update the TFT_eSPI library (included version is compatible with all WeatherDuino software and other software, so you can safely replace any installed version).
- Update the RadioHead library (included version is compatible with all WeatherDuino software and other software, so you can safely replace any installed version).

- VERY IMPORTANT - Upload the fonts and icons to SPIFFS memory by using the “ESP8266 Sketch Data Upload” menu option in the Arduino IDE.

Waiting for your feedback.
Rgs.

Hello,

All is looking fine, but "ě" and "Ě"... These letters are not viewable.

[hornychz]

The bad texts are:

"4 DENNÍ PŘEDPOVĚĎ"
"Během dne převážně zataženo"

[jarekh3]

Everything works perfectly now. Thanks Armindo 
I have only two comments:
The text "Please wait, getting data" is untranslated (this is not a big problem).
The third dot is yellow (bigger problem).

J.


aaa...  the letter "Ł" does not work on the "System Info" screen (WYŁ/WŁ - off/on).
That was from the version v3.0_b007

[werk_ag]

The bad texts are:

"4 DENNÍ PŘEDPOVĚĎ"
"Během dne převážně zataženo"

Fixed.
Just update the SPIFFS files.

Thanks.

[werk_ag]

Everything works perfectly now. Thanks Armindo 
I have only two comments:
The text "Please wait, getting data" is untranslated (this is not a big problem).
The third dot is yellow (bigger problem).

J.

Thanks.
The untranslated text "Please wait, getting data" shown before each 4 Days Forecast update isn't a bug... That is something that have come to stay.  

The third dot is yellow (bigger problem).

Only the third dot? All text sentence should be in yellow colour.
Sometimes this small details have a big importance. Do you have a picture?

aaa...  the letter "Ł" does not work on the "System Info" screen (WYŁ/WŁ - off/on).
That was from the version v3.0_b007

The letter "Ł" is included on the font. It should be shown.
Have you checked with latest release Pro2 Compact v3.0_b011?