05-04-2017, 17:47
Hi, I have finished building all three of my boards. The TX and RX both work fine and talk to each other.
I can not get the WD code to compile. I am pretty new to Arduino, and not sure where to go from here.
Thanks for your help.
Here is the error I receive when trying to compile the sketch:
I can not get the WD code to compile. I am pretty new to Arduino, and not sure where to go from here.
Thanks for your help.
Here is the error I receive when trying to compile the sketch:
Quote:Arduino: 1.8.2 (Windows 10), Board: "Arduino Nano, ATmega328"
D:\Arduino\WeatherDuinoPro2\Software\WeatherDuino_Pro2_Newest\software\WD software\WeatherDuino_Pro2_WD_v2.0_b008\WeatherDuino_Pro2_WD_v2.0_b008.ino: In function 'void setup()':
WeatherDuino_Pro2_WD_v2.0_b008:177: error: 'setSyncProvider' was not declared in this scope
setSyncProvider(syncProvider); // Sync system time with RTC
^
WeatherDuino_Pro2_WD_v2.0_b008:178: error: 'setSyncInterval' was not declared in this scope
setSyncInterval(86400); // Every 24 hours
^
D:\Arduino\WeatherDuinoPro2\Software\WeatherDuino_Pro2_Newest\software\WD software\WeatherDuino_Pro2_WD_v2.0_b008\WeatherDuino_Pro2_WD_v2.0_b008.ino: In function 'void loop()':
WeatherDuino_Pro2_WD_v2.0_b008:256: error: 'minute' was not declared in this scope
if (minute() != last_min1)
^
WeatherDuino_Pro2_WD_v2.0_b008:277: error: 'second' was not declared in this scope
if ((BackLight_State == true) && (second() != last_second)) // Clock update interval - 1s
^
D:\Arduino\WeatherDuinoPro2\Software\WeatherDuino_Pro2_Newest\software\WD software\WeatherDuino_Pro2_WD_v2.0_b008\D_TFT1.ino: In function 'void DisplayClock_TFT()':
D_TFT1:405: error: 'minute' was not declared in this scope
if (last_min != minute())
^
D_TFT1:407: error: 'hour' was not declared in this scope
sprintf(Clock_buf, "%02d:%02d", hour(), minute());
^
D_TFT1:412: error: 'day' was not declared in this scope
sprintf(Clock_buf, "%02d-%02d-%d", day(), month(), year());
^
D_TFT1:412: error: 'month' was not declared in this scope
sprintf(Clock_buf, "%02d-%02d-%d", day(), month(), year());
^
D_TFT1:412: error: 'year' was not declared in this scope
sprintf(Clock_buf, "%02d-%02d-%d", day(), month(), year());
^
D_TFT1:414: error: 'year' was not declared in this scope
sprintf(Clock_buf, "%d/%02d/%02d", year(), month(), day());
^
D_TFT1:414: error: 'month' was not declared in this scope
sprintf(Clock_buf, "%d/%02d/%02d", year(), month(), day());
^
D_TFT1:414: error: 'day' was not declared in this scope
sprintf(Clock_buf, "%d/%02d/%02d", year(), month(), day());
^
D_TFT1:422: error: 'second' was not declared in this scope
if (second()%2)
^
D:\Arduino\WeatherDuinoPro2\Software\WeatherDuino_Pro2_Newest\software\WD software\WeatherDuino_Pro2_WD_v2.0_b008\RX.ino: In function 'void ReceiveDataRF()':
RX:124: error: 'setTime' was not declared in this scope
setTime(Hora, Minuto, 1, RX_Data[4], RX_Data[3], RX_Data[2] + 1900);
^
Multiple libraries were found for "LiquidCrystal_I2C.h"
Used: C:\Users\scott\Documents\Arduino\libraries\LiquidCrystal-I2C
Not used: C:\Users\scott\Documents\Arduino\libraries\LiquidCrystal
Not used: C:\Users\scott\Documents\Arduino\libraries\LiquidCrystal
Not used: C:\Users\scott\Documents\Arduino\libraries\LiquidCrystal
Not used: C:\Users\scott\Documents\Arduino\libraries\LiquidCrystal
Multiple libraries were found for "Adafruit_HTU21DF.h"
Used: C:\Users\scott\Documents\Arduino\libraries\Adafruit_HTU21DF
Not used: C:\Users\scott\Documents\Arduino\libraries\Adafruit_HTU21DF_Library
exit status 1
'setSyncProvider' was not declared in this scope
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
