10-10-2017, 14:41
Hi PremekK ,
Welcome to the forum.
Yes, the JP2 should only be placed when using the FO wind vane
That's right, should be 328. I will correct it as soon as possible.
There is no need to use any cooler on the Mosfet. The current throught it its only 100 to 120mA (depending on the fan used for the RS shield).
Welcome to the forum.
Quote:Thank you for asnwers. As for the wind - I am asking about JP2 position. So this should be connected through for FO only?
Yes, the JP2 should only be placed when using the FO wind vane
Quote:Arduino Nano 368 - Isn't the number a typo from 328?
That's right, should be 328. I will correct it as soon as possible.
Quote: - On some pictures of TX builds here on forum there are coolers placed on Mosfets. Are they necessary?
There is no need to use any cooler on the Mosfet. The current throught it its only 100 to 120mA (depending on the fan used for the RS shield).