04-08-2017, 02:25
The SHT35-D arrived today. Very quick shipping from the U.K.
Soldered the headers, installed the SF2 filter, brushed on the conformal coating and let it dry. Stopped Cumulus MX, removed power from TX0, swapped the SHT31 for the SHT35. Power up TX0 and by the time I got back to the house there was a reading on the receiver. I watched the readings fluctuate for a minute or two, started Cumulus MX and so far so good.
It has been 2 hours since I swapped the SHT31-D for the SHT35-D and it is tracking my other weather station the same as the SHT31-D. So it looks like the ClosedCube SHT35-D is compatible with the SHT31 library.
![[Image: Vt2r7cZ.jpg]](http://i.imgur.com/Vt2r7cZ.jpg)
Soldered the headers, installed the SF2 filter, brushed on the conformal coating and let it dry. Stopped Cumulus MX, removed power from TX0, swapped the SHT31 for the SHT35. Power up TX0 and by the time I got back to the house there was a reading on the receiver. I watched the readings fluctuate for a minute or two, started Cumulus MX and so far so good.
It has been 2 hours since I swapped the SHT31-D for the SHT35-D and it is tracking my other weather station the same as the SHT31-D. So it looks like the ClosedCube SHT35-D is compatible with the SHT31 library.