[JT118]

Yes it looks like those. The problem is there is only 1 port for the wind and I have 2 cords each with their own RJ11. I'll have to cut the ends off and somehow combine them into a single RJ12, but I need to know the pinout in order to do that.

Thank you for the rain bucket info.

Just check the wind vane, normally the anemometer plugs into the bottom of the wind vane and the wire from the wind vane carries both signals to the TX board. (Or vice versa I cannot remember which.) See picture here,

http://sandaysoft.com/forum/viewtopic.ph...2&start=10

http://www.philpot.me/weatherinsider.html