[Bneaus]

   
Hi
another Brisbane station up and running, first I must thank all involved in the development of the station and making it available to all, it has been a very enjoyable project to build. I have just added a wind vane to the system I used a Hall effect 0-360 Deg angle sensor  available on Ebay and Alliexpress for about $27Aus, the device looks like a small electric motor with a 6mm stainless shaft, precision bearings, torque <5mN-m, long life 50 million revolutions and no contacts three terminals on the base gnd, Vcc (5V) and output (0-5V) at the moment the wind vane is under test and working satisfactory using the Inspeed E vane settings