20-09-2015, 09:05
(This post was last modified: 20-09-2015, 09:05 by GreggWardNZ.)
(20-09-2015, 07:35)uncle_bob Wrote: Hi Greg,
Double check the soldering on the 2N7000 transistor.
Replacing the 2N7000 may be worth trying too.
As with most transistors, they don't like too much heat. Since this is CMOS, they also don't like big static charges. Also double check the soldering on the NanoD6 port.
Also double check the orientation of the LED.
Cheers UB
Thank you very much UB, I will give these a try and let you know how I get on.
Cheers Gregg