18-09-2021, 12:51
Nice work mate.
(18-09-2021, 04:11)Sun_Dancer Wrote: Hello weather frogs!
This is a 2-part indoor housing for the WeatherDuino Air Quality Monitor III with Sensorion SPS30 for particle measurement, MH-Z19 for Co2 measurement and 1.3 inch OLED.
The AQM board is attached between the two halves of the housing with 4 M3x10 screws.
You can find the case and further information on my Thingiverse profile
https://www.thingiverse.com/thing:4967779
If you like it, please leave a like, thanks.