[WetCoast]

Hi,
I just had an error message when I tried to do the ESP8266 Sketch Data Upload. After copying the 'tools' directory to my 'sketches' directory I received the following error when I tried to do the upload:

Code:

Arduino: 1.8.12 (Linux), Board: "LOLIN(WEMOS) D1 R2 & mini, 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most compatible), 4MB (FS:2MB OTA:~1019KB), v2 Lower Memory, Disabled, None, Only Sketch, 921600"

[SPIFFS] data    : /home/gord/Arduino/WeatherDuino_Pro2_Compact v3/software/RX software/WeatherDuino_P2ESP8266_RX_v3.1_b012/data
[SPIFFS] size    : 2024
[SPIFFS] page    : 256
[SPIFFS] block   : 8192
/fonts/ArialBold11LEA.vlw
/fonts/ArialBold11.vlw
/fonts/NotoSansBold14.vlw
/fonts/NotoSansBold14LEA.vlw
/icons/WDicon.bmp
/icons/tree1.bmp
/icons/termometro.bmp
/icons/home.bmp
/icons/home1.bmp
/icons/tree.bmp
/icons/moisture.bmp
/splash/Pro2Compact_Splash.jpg
/splash/WDlogo.jpg
/icon50/thunderstorm.bmp
/icon50/rain.bmp
/icon50/fog.bmp
/icon50/unknown.bmp
/icon50/hail.bmp
/icon50/cloudy.bmp
/icon50/clear-day.bmp
/icon50/snow.bmp
/icon50/lightRain.bmp
/icon50/sleet.bmp
/icon50/drizzle.bmp
/icon50/wind.bmp
/icon50/clear-night.bmp
/icon50/partly-cloudy-night.bmp
/icon50/partly-cloudy-day.bmp
[SPIFFS] upload  : /tmp/arduino_build_177758/WeatherDuino_P2ESP8266_RX_v3.1_b012.spiffs.bin
[SPIFFS] address  : 0x200000
[SPIFFS] reset    : --before default_reset --after hard_reset
[SPIFFS] port     : /dev/ttyUSB0
[SPIFFS] speed    : 921600
[SPIFFS] python   : python
[SPIFFS] uploader : /home/gord/.arduino15/packages/esp8266/hardware/esp8266/2.6.3/tools/upload.py

usage: esptool [-h] [--chip {auto,esp8266,esp32}] [--port PORT] [--baud BAUD]
               [--before {default_reset,no_reset,no_reset_no_sync}]
               [--after {hard_reset,soft_reset,no_reset}] [--no-stub]
               [--trace] [--override-vddsdio [{1.8V,1.9V,OFF}]]
               {load_ram,dump_mem,read_mem,write_mem,write_flash,run,image_info,make_image,elf2image,read_mac,chip_id,flash_id,read_flash_status,write_flash_status,read_flash,verify_flash,erase_flash,erase_region,version}
               ...
esptool: error: unrecognized arguments: --end
SPIFFS Upload failed!

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

I downloaded the 'esp8266fs.jar' file from GitHub and copied it to the same place and everything worked fine.
Just thought you might like to know.

Cheers,
Gord