23-08-2018, 16:01
Hello Michael.
I did not use the six pins.
I soldered leads to the other end that has 4 pads.
SCL SDA VCC GND
Then connected:
SCL to SCL
SDA to SDA
VCC to 5V on the I2C/LCD pin ( could be any other 5V pin thats free )
GND to GND
Regards Derek
I did not use the six pins.
I soldered leads to the other end that has 4 pads.
SCL SDA VCC GND
Then connected:
SCL to SCL
SDA to SDA
VCC to 5V on the I2C/LCD pin ( could be any other 5V pin thats free )
GND to GND
Regards Derek

