Temperature sensor problem - Printable Version

+- WeatherDuino Forum (https://www.meteocercal.info/forum)
+-- Forum: Weather Stations - WeatherDuino Pro2 Line (https://www.meteocercal.info/forum/Forum-Weather-Stations-WeatherDuino-Pro2-Line)
+--- Forum: General Talking (https://www.meteocercal.info/forum/Forum-General-Talking)
+--- Thread: Temperature sensor problem (/Thread-Temperature-sensor-problem)

---

Temperature sensor problem - ok2arm - 31-07-2018

Hi everyone,
I have set TX,RX,WD... System is synchronized (time, presure,rain etc..), but temperature from TX DHT22 is not :/

In TX setup I have define DHT22, but still not working

#define TH_Sensor1 1 // [SENSOR 1] - 0 for SHT1x sensor, 1 for DHT22 sensor, 9 for Not Used

Any idea what ? Sensor is working, I test it on WDboard...

---

RE: Temperature sensor problem - hornychz - 31-07-2018

Hi ok2arm,

Could you post here the both whole config files - from TX and RX too?

---

RE: Temperature sensor problem - ok2arm - 31-07-2018

(31-07-2018, 09:03)hornychz Wrote:  Hi ok2arm,

Could you post here the both whole config files - from TX and RX too?

Hi,
here is link for download, sry I Am not able send here...
https://we.tl/dwVGxeT7lu

---

RE: Temperature sensor problem - hornychz - 31-07-2018

(31-07-2018, 10:25)ok2arm Wrote:  

(31-07-2018, 09:03)hornychz Wrote:  Hi ok2arm,

Could you post here the both whole config files - from TX and RX too?

Hi,
here is link for download, sry I Am not able send here...
https://we.tl/dwVGxeT7lu

But these are only the main code files, we need to see the config files ...

---

RE: Temperature sensor problem - ok2arm - 31-07-2018

Oh, Sry Zdenek, again here...

https://we.tl/2tD8yPQgRt

Tnx

(31-07-2018, 11:35)hornychz Wrote:  

(31-07-2018, 10:25)ok2arm Wrote:  

(31-07-2018, 09:03)hornychz Wrote:  Hi ok2arm,

Could you post here the both whole config files - from TX and RX too?

Hi,
here is link for download, sry I Am not able send here...
https://we.tl/dwVGxeT7lu

But these are only the main code files, we need to see the config files ...

---

RE: Temperature sensor problem - rich27gc - 31-07-2018

(31-07-2018, 11:54)ok2arm Wrote:  Oh, Sry Zdenek, again here...

https://we.tl/2tD8yPQgRt

Tnx

(31-07-2018, 11:35)hornychz Wrote:  

(31-07-2018, 10:25)ok2arm Wrote:  

(31-07-2018, 09:03)hornychz Wrote:  Hi ok2arm,

Could you post here the both whole config files - from TX and RX too?

Hi,
here is link for download, sry I Am not able send here...
https://we.tl/dwVGxeT7lu

But these are only the main code files, we need to see the config files ...

Hi ok2arm

Looking at your RX config I think you need to change the "Define type of your outside Temperture / Humidity sensor" from 0 to 1

   

---

RE: Temperature sensor problem - ok2arm - 31-07-2018

Ouu, I Am I... Thank !
So I need last two sensors, Rain and Wind, can you recommend something ?
Tnx

---

RE: Temperature sensor problem - rich27gc - 31-07-2018

(31-07-2018, 17:21)ok2arm Wrote:  Ouu, I Am I... Thank !
So I need last two sensors, Rain and Wind, can you recommend something ?
Tnx

Well I use fine offset rain and wind sensors, they're OK, maybe not the most accurate but they are cheap to buy and can usually be found on ebay.

---

RE: Temperature sensor problem - werk_ag - 31-07-2018

Hi ok2arm

The cheapest ones are the fineoffset models. For the price they do a very good job.
Out of curiosity, can you post a picture of the backside of your TFT displays. I'm afraid that you could have some difficulties with the touch panel, at least with the WD unit.

---

RE: Temperature sensor problem - ok2arm - 31-07-2018

(31-07-2018, 18:54)Werk_AG Wrote:  Hi ok2arm

The cheapest ones are the fineoffset models. For the price they do a very good job.
Out of curiosity, can you post a picture of the backside of your TFT displays. I'm afraid that you could have some difficulties with the touch panel, at least with the WD unit.

Hi Werk,
WD unit work well, but RX unit... Sometimes touch not working, but this is not problem, because I need just main screen, also on the others unit...

Pls, can you send me exact rain/wind/direc unit from Ebay, maybee better for help after connection

And, any idea how to connect bigger display for WD unit ?

Thank !!

---