[cjthomson]

Hi Everyone

I've been doing some more checks on my WD RX unit and so far it is receiving data from my Auriol Wireless weather station - everything seems fine. This evening I decided to power up the Auriol Rain gauge to make sure that the RX would receive data from it okay.

It does appear to be receiving data but it's giving a reading of 15713.25mm of rain!! I've gone through the configuration and can't see anything that I can change that would resolve this.

Has anyone else had a similar experience with the Auriol Wireless Rain Guage?

Thanks in advance
Chris

[werk_ag]

Hi Chris

Please do a factory reset, pressing the push button for 5 seconds. During the RX initialization sequence keep all your Auriol weather instruments powered ON (rain gauge included). After initialization, the RX unit should start with the rain counter at zero.

[cjthomson]

Hi Chris

Please do a factory reset, pressing the push button for 5 seconds. During the RX initialization sequence keep all your Auriol weather instruments powered ON (rain gauge included). After initialization, the RX unit should start with the rain counter at zero.

Thanks! That did the trick :-)

Everything seems to be working, now I need to find a case for the TX unit

[werk_ag]

Thanks