04-10-2015, 20:10
(This post was last modified: 04-10-2015, 22:27 by GreggWardNZ.)
I have the new Tx board up and running now and the comms seems to be far more reliable and works over a greater distance. Maybe not having an antenna attached to the FS1000A of the first board, caused it to get damaged, as you suggested Werk_AG.
Now everything except for my external SHT10 temperature/humidity sensor, is working correctly on the Tx unit. It is sending through erroneous temperatures i.e. -40C, constantly. I have a second SHT10 sensor that I have hooked up to the Tx board, to test with, which is showing the same issue. I have turned on some debugging in the Tx code and am trying to track the issue down. Maybe a problem with one of the solder joints?
Now everything except for my external SHT10 temperature/humidity sensor, is working correctly on the Tx unit. It is sending through erroneous temperatures i.e. -40C, constantly. I have a second SHT10 sensor that I have hooked up to the Tx board, to test with, which is showing the same issue. I have turned on some debugging in the Tx code and am trying to track the issue down. Maybe a problem with one of the solder joints?