24-01-2020, 10:24
Hi Bomben,
in addition to Werk's post concerning the used processing time I would propose the following solution:
You could modify the software of the receiver according to my data logging addon: https://www.meteocercal.info/forum/Threa...ging-addon
This feature is working properly and maintained by me and allowes you to send all the collected data each minute to the serial port.
Here you could introduce a co processing unit - e.g. an Arduino mega (or a derivate) to receive the data and convert it back to a 0-5V analog signal.
Then you have a lower resolution of the signal but you would not need additional devices or if you want the 0-10V solution you have at least enough space and execution time.
Regards,
Stefan
in addition to Werk's post concerning the used processing time I would propose the following solution:
You could modify the software of the receiver according to my data logging addon: https://www.meteocercal.info/forum/Threa...ging-addon
This feature is working properly and maintained by me and allowes you to send all the collected data each minute to the serial port.
Here you could introduce a co processing unit - e.g. an Arduino mega (or a derivate) to receive the data and convert it back to a 0-5V analog signal.
Then you have a lower resolution of the signal but you would not need additional devices or if you want the 0-10V solution you have at least enough space and execution time.
Regards,
Stefan