12-03-2019, 21:00
Hi,
Perhaps you don't need to order any new boards. The described problem can be solved by using a small wire between a point where you have the 5V and a point where the 5V is missing.
After installing the connectors, you can do it easily. Do the connections on the underside of the board, so the wire will not be visible (per example between the 5V pin ob the SHT2X connector and the one that is faulty).
So, before proceeding with any order, let me know if the patch solved the problem.
Regards
Werk_AG
Perhaps you don't need to order any new boards. The described problem can be solved by using a small wire between a point where you have the 5V and a point where the 5V is missing.
After installing the connectors, you can do it easily. Do the connections on the underside of the board, so the wire will not be visible (per example between the 5V pin ob the SHT2X connector and the one that is faulty).
So, before proceeding with any order, let me know if the patch solved the problem.
Regards
Werk_AG