[werk_ag]

Something is a little awry (yes the co-ordinates are correct, I double checked)   and the url I set does not seem to show

Welcome to Picton Weather!

Last time that both of your weather stations have successfully contacted the WeatherDuino Server, none of them sent any URL.

[2019-01-08 11:31:17 Lisbon time] Device Type: P2ESP8266RX
[2019-01-01 01:04:31 Lisbon time] Device Type: P2AT2560RX

[41south]

Strange, it's definitely in there. I'm about to do the update so will see after that

Edit: Whoops, there's no update for the Pro2 compact so I won't do that

Code:

const char* WeatherStation_Name = "41south";    // Put here your Weather Station name or Location name - DON'T LEAVE EMPTY
const char* WeatherStation_URL  = "http://41south.net.nz";    // If you have an URL to your Meteo Website put it here (can be the WU URL). URL should start with http or https

[41south]

Can you confirm that the lat/lon should be 3 decimal places or 5? I see mine is a little out so I will update it

- Precision of the Latitude and Longitude data has enhanced from 3 to 5 decimal places (thanks t3gathome for your research on this).

but in the code it says

// Put here your Station latitude in degrees North (always use 3 decimal places)

And this station [[2019-01-01 01:04:31 Lisbon time] Device Type: P2AT2560RX] is now replaced so can be removed (or will it just remove itself over time?

[werk_ag]

Can you confirm that the lat/lon should be 3 decimal places or 5? I see mine is a little out so I will update it

- Precision of the Latitude and Longitude data has enhanced from 3 to 5 decimal places (thanks t3gathome for your research on this).

but in the code it says

// Put here your Station latitude in degrees North (always use 3 decimal places)

On Config_Options.h of latest Pro2 PLUS release v8.1_b002, I can see this:

Code:

// --------------------------------------------------------------------------------------
//   Define your Weather Station location. Use decimal format for Latitude and Longitude
// --------------------------------------------------------------------------------------
#define LATITUDE      39.22350    // Put here your Station latitude in degrees North (with up to 5 decimal places, don't use less than 3 decimal places)
#define LONGITUDE     -8.99650    // Put here your Station longitude in degrees - minus for West (with up to 5 decimal places, don't use less than 3 decimal places)
#define ELEVATION     124         // Put here your Station height above sea level in Meters (no decimal places)

On Config_Options.h of latest Pro2 Compact release RX v2.1_b001, I can see this too:

Code:

// --------------------------------------------------------------------------------------
//   Define your Weather Station location. Use decimal format for Latitude and Longitude
// --------------------------------------------------------------------------------------
#define LATITUDE      39.22350    // Put here your Station latitude in degrees North (up to 5 decimal places, don't use less than 3 decimal places)
#define LONGITUDE     -8.99650    // Put here your Station longitude in degrees - minus for West (up to 5 decimal places, don't use less than 3 decimal places)
#define ELEVATION     124         // Put here your Station height above sea level in Meters (no decimal places)

And this station [[2019-01-01 01:04:31 Lisbon time] Device Type: P2AT2560RX] is now replaced so can be removed (or will it just remove itself over time?

it will just remove itself over time.

[41south]

Excellent, sorted, thanks.

Did you see anything I need to change in my url for it to show? Or is it possibly because there are 2 stations showing?

[werk_ag]

It is listed now.

No problem with having two or more weather station on the same location. Each one can have the same or a different name and URL.
Indeed as we can see on the map, there are some users with two WeatherDuino weather stations on the same location.

[werk_ag]

Welcome DLangWeather!

The first WeatherDuino weather station in Canada to be listed on the map
I believe that another one, also in Canada, will be added soon.