17-02-2019, 12:25
Hello.
Finally, I get 9x% done. From buying Auriol Station in Lidl and finding your amazing site, an incredible year. I miss your work because it took me only six months to assemble, revive and test. And I just install it according to your suggestion that I only fix my mistakes and mainly packing into some box. Basically, I followed Mr Hornych's suggestion https://meteo.brandysnl.cz/ and his articles published on https://arduino.cz/ where I took inspiration from the cabinet installation including Raspberry Pi for the CumulusMX program (the finishing is mine weak point). Just learning Linux for Pi took a long time, but it was worth it. The station is reliable and in addition to the upgrade fw, or linux runs completely reliably. As well as the outdoor part). I've fought a bit with AirQualityMonitoring, but it's more like encapsulation, otherwise it's also running reliably.
In fact, everything is running "home" (it's just joy) and I do not have my own domain, however, I host my Synology device on my Synology, including SQL, and I see it out only because the provider has a public IP although it can change at any time. That's why I do not want to present her much. I also had the idea of editing (writing) some www pages for solar charging statistics and their control. But I found it to be a very complicated part that I finally chose a Czech template that fulfilled everything I wanted. In particular, charts for visualizing saved data that interest me. (it's not a problem to learn, but the results come out for a year). I've been able to track down the PWS weather for Android and have everything I wanted from the weather station.
But it's really an amateur weather station, because it's located on the facade of a panel house. On the shoulder arm with a small photo panel and the big two are on the balcony, I could not even push them. Still waiting for me in the summer to push the "rain gauge" away from the house and make the heating for the winter. Also, refine the radiation shield on the thermometer probe and add the fan.
I have greatly appreciated the "forum" where I have been searching for answers all the time about things that I either do not understand or did not work properly, and I have always found the answer. Thanks to everyone who contributes here, it's a great job.
I still attach several photos and the station's www address.
www: http://78.45.185.216/meteotemplate/indexDesktop.php
AQI: https://thingspeak.com/channels/667750
Polda.t
![[Image: rx_raspi.jpg]](http://78.45.185.216/meteo/pictures/rx_raspi.jpg)
![[Image: wd.jpg]](http://78.45.185.216/meteo/pictures/wd.jpg)
![[Image: tx_1.jpg]](http://78.45.185.216/meteo/pictures/tx_1.jpg)
![[Image: tx_2.jpg]](http://78.45.185.216/meteo/pictures/tx_2.jpg)
Finally, I get 9x% done. From buying Auriol Station in Lidl and finding your amazing site, an incredible year. I miss your work because it took me only six months to assemble, revive and test. And I just install it according to your suggestion that I only fix my mistakes and mainly packing into some box. Basically, I followed Mr Hornych's suggestion https://meteo.brandysnl.cz/ and his articles published on https://arduino.cz/ where I took inspiration from the cabinet installation including Raspberry Pi for the CumulusMX program (the finishing is mine weak point). Just learning Linux for Pi took a long time, but it was worth it. The station is reliable and in addition to the upgrade fw, or linux runs completely reliably. As well as the outdoor part). I've fought a bit with AirQualityMonitoring, but it's more like encapsulation, otherwise it's also running reliably.
In fact, everything is running "home" (it's just joy) and I do not have my own domain, however, I host my Synology device on my Synology, including SQL, and I see it out only because the provider has a public IP although it can change at any time. That's why I do not want to present her much. I also had the idea of editing (writing) some www pages for solar charging statistics and their control. But I found it to be a very complicated part that I finally chose a Czech template that fulfilled everything I wanted. In particular, charts for visualizing saved data that interest me. (it's not a problem to learn, but the results come out for a year). I've been able to track down the PWS weather for Android and have everything I wanted from the weather station.
But it's really an amateur weather station, because it's located on the facade of a panel house. On the shoulder arm with a small photo panel and the big two are on the balcony, I could not even push them. Still waiting for me in the summer to push the "rain gauge" away from the house and make the heating for the winter. Also, refine the radiation shield on the thermometer probe and add the fan.
I have greatly appreciated the "forum" where I have been searching for answers all the time about things that I either do not understand or did not work properly, and I have always found the answer. Thanks to everyone who contributes here, it's a great job.
I still attach several photos and the station's www address.
www: http://78.45.185.216/meteotemplate/indexDesktop.php
AQI: https://thingspeak.com/channels/667750
Polda.t
)
)
