[Barrow4491]

They both seem to have extra data displayed (The menu screen has a temp and Rh displayed in the bottom right  and the other has an extra date and time)

Hi Jim,

Since now we have a menu system, allowing us to jump directly to a particular data screen, the function to hide a particular data screen doesn't make sence anymore, so it was removed.
I forgot to remove the text, "(Use 9 to prevent a particular data screen to be shown)" from the Config_Options.h file

Its already corrected, and should be:

Code:

// -------------------------------------------------------------------------------------- //   Define display order of data screens on the TFT //   Use numbers from 1 to 4. // -------------------------------------------------------------------------------------- #define AirQuality_Data    1 #define TXinfo_Data        2 #define ExtraSensors_Data  4 #define SoilLeaf_Data      3

Werk,
I have reloaded the modified software and the problem with the temp/rh on the menu screen is fixed but I can still create the extra date and time on the screen blanker by touching the r/h side top of the screen repeatedly.
It doesn't bother me as I know how to avoid it an the screen saver works fine.
My issue is with the AQ data not being relayed to the WD units, but all other data is.
I have attached my config file and verified that the board is pro 2 v2.21

Code:

// -------------------------------------------------------------------------------------- //       WeatherDuino Wireless Display //       Version: AT328_WD_v6.0-b002 //        User configurable options // -------------------------------------------------------------------------------------- // -------------------------------------------------------------------------------------- //   Define the ID for the Wireless Display Units //   Relay_ID should be equal to the value set in your Main RX software // -------------------------------------------------------------------------------------- const byte Relay_ID = 0xA3; // -------------------------------------------------------------------------------------- //   Define Interface Language // --------------------------------------------------------------------------------------       #include "_lang/en_GB.h"      // Change the language code according to your preference. Keep "_lang/" and the ".h" at the end                              // Currently available languages: en_GB, fr_FR, de_DE, pt_PT, es_ES, cs_CZ, nl_NL, it_IT // --- Define if your ILI9341 TFT Display have touch capabilities // --- ATENTION! Only WD boards v2.20 (released in 2015) or greater have hardware support for the touch panel // --- A TFT with a touch panel is highly recommended #define Touch_Display         1      // 0= Display without touch panel, 1 = Display with touch panel // --- Define Backlight timeOut byte BackLight_timer        = 0;    // Timeout for TFT backlight in minutes (1 to 255). 0= Always ON // --- Define type of Local TH sensor #define InsideTH_Sensor       0      // 0= DHT22, 1= HTU21D, 2= SHT21, 3= SHT31, 9= Use Main Station TH sensor // --- Fine adjusts for Local Inside Temperature int TemperaturaInt_offset =   0;     // Inside Temperature Fine Adjust in Tenths of Degrees // ---- Define personalized names for each Extra Sensor. Attention, maximum 8 chars, const char ESname_1[] PROGMEM = "Telhado";     // 8 chars max const char ESname_2[] PROGMEM = "LagoAgua";    // 8 chars max const char ESname_3[] PROGMEM = "Alpendre";    // 8 chars max const char ESname_4[] PROGMEM = "Main Out";    // 8 chars max const char ESname_5[] PROGMEM = "SENSOR 5";    // 8 chars max const char ESname_6[] PROGMEM = "Dust TH";     // 8 chars max const char ESname_7[] PROGMEM = "";            // 8 chars max // ---- Define personalized names for each Soil and Leaf Sensor. Attention, maximum 8 chars const char SSname_1[] PROGMEM = "Relva";        // 8 chars max const char SSname_2[] PROGMEM = "";             // 8 chars max const char SSname_3[] PROGMEM = "";             // 8 chars max const char SSname_4[] PROGMEM = "BIOS";         // 8 chars max const char LSname_1[] PROGMEM = "Folhas";       // 8 chars max const char LSname_2[] PROGMEM = "";             // 8 chars max const char LSname_3[] PROGMEM = "";             // 8 chars max const char LSname_4[] PROGMEM = "";             // 8 chars max // -------------------------------------------------------------------------------------- //   Define display order of data screens on the TFT //   Use numbers from 1 to 4. Use 9 to prevent a particular data screen to be shown // -------------------------------------------------------------------------------------- #define ExtraSensors_Data 3 #define SoilLeaf_Data     4 #define AirQuality_Data   1 #define TXinfo_Data       2 /*************************************************************************************     Hardware Settings *************************************************************************************/ // -------------------------------------------------------------------------------------- //   Define PCB Version Number // -------------------------------------------------------------------------------------- //                              Take particular attention to this setting. //                              Your system, specially the touch screen may not work properly if you define a wrong pcb version number. //                              In case of doubt check what is printed in your pcb. #define Board_Version    2   // PCB version number (integer part only): 2, 3 or 4, 0= Others (Old RX converted boards) // SHT31 I2c Address // Default address will work most of the times! #define SHT31_address 0x44      // Default value is 0x44, but it can be changed to 0x45 // --------------------------------------------------------------------------------------------------- //     End of user configurable options // ---------------------------------------------------------------------------------------------------