OK that's answers everything 
Thanks for the assistance everyone.
Thanks for the assistance everyone.
Daylight Savings Time
Posts: 329
Threads: 27
Joined: Dec 2016
Weather Station: Alma, MI USA
Country:
Threads: 27
Joined: Dec 2016
Weather Station: Alma, MI USA
Country:
Posts: 5.411
Threads: 336
Joined: Apr 2014
Weather Station: WeatherDuino 4Pro
Country:
Threads: 336
Joined: Apr 2014
Weather Station: WeatherDuino 4Pro
Country:
06-11-2017, 03:34
(05-11-2017, 08:22)danner Wrote: Noticed a glitch in the matrix.
Seems that the matrix is fine, it's me who's having glitches...
Posts: 329
Threads: 27
Joined: Dec 2016
Weather Station: Alma, MI USA
Country:
Threads: 27
Joined: Dec 2016
Weather Station: Alma, MI USA
Country:
07-11-2017, 12:55
Quick question.
In Cumulus MX under "Settings>Station settings>options" there is a selection for "Synchronise station clock. Keep station clock in line with computer clock (Davis/Instromet only)"
Does this setting do anything to the Pro2+ receiver?
TIA
In Cumulus MX under "Settings>Station settings>options" there is a selection for "Synchronise station clock. Keep station clock in line with computer clock (Davis/Instromet only)"
Does this setting do anything to the Pro2+ receiver?
TIA
Posts: 5.411
Threads: 336
Joined: Apr 2014
Weather Station: WeatherDuino 4Pro
Country:
Threads: 336
Joined: Apr 2014
Weather Station: WeatherDuino 4Pro
Country:
07-11-2017, 15:56
Yes, it syncs the station clock every day at 4AM. It's usefull to everyone which have Pro2 receivers, or Pro2 PLUS receivers that isn't using the sync to a NTP server.
Posts: 329
Threads: 27
Joined: Dec 2016
Weather Station: Alma, MI USA
Country:
Threads: 27
Joined: Dec 2016
Weather Station: Alma, MI USA
Country:
(07-11-2017, 15:56)Werk_AG Wrote: Yes, it syncs the station clock every day at 4AM. It's usefull to everyone which have Pro2 receivers, or Pro2 PLUS receivers that isn't using the sync to a NTP server.
Could that explain why my receiver time was changing back and forth by 1 hour since the time change was incorrectly set in my receiver?
I have an RTC in my receiver. Should I turn off the Cumulus MX "synchronize station clock" feature or just leave it on? I guess if everything is set correctly it shouldn't make a difference.
Posts: 1.601
Threads: 38
Joined: Apr 2015
Weather Station: B/L Weather Station
Country:
Threads: 38
Joined: Apr 2015
Weather Station: B/L Weather Station
Country:
07-11-2017, 23:45
(07-11-2017, 23:12)danner Wrote:(07-11-2017, 15:56)Werk_AG Wrote: Yes, it syncs the station clock every day at 4AM. It's usefull to everyone which have Pro2 receivers, or Pro2 PLUS receivers that isn't using the sync to a NTP server.
Could that explain why my receiver time was changing back and forth by 1 hour since the time change was incorrectly set in my receiver?
I have an RTC in my receiver. Should I turn off the Cumulus MX "synchronize station clock" feature or just leave it on? I guess if everything is set correctly it shouldn't make a difference.
Hi danner,
I'm not thinking too much about it like you ...
At Raspbian (CumulusMX) I have NTP sync turned on and on my RX+ also.So why do they still sync with each other? I just turned it off and I never had any problem ...
![[Image: Time.jpg]](http://meteo.brandysnl.cz/MyDocs/Forum/Time.jpg)
Posts: 329
Threads: 27
Joined: Dec 2016
Weather Station: Alma, MI USA
Country:
Threads: 27
Joined: Dec 2016
Weather Station: Alma, MI USA
Country:
08-11-2017, 03:58
Thanks, Zdenek.
Posts: 5.411
Threads: 336
Joined: Apr 2014
Weather Station: WeatherDuino 4Pro
Country:
Threads: 336
Joined: Apr 2014
Weather Station: WeatherDuino 4Pro
Country:
12-11-2017, 01:50
(05-11-2017, 08:22)danner Wrote: I'm still running v320_b002 because it has been raining and cold and I'm not changing the software on the TX until spring so I haven't changed the receiver software either.
Supossing your TX software is at least v3.xx, you can upgrade the RX to v4.xx without upgrading the TX software.
« Next Oldest | Next Newest »
Users browsing this thread: 1 Guest(s)