[danner]

A battery voltage of 13.75V is absolutely normal when it is being charged.

Sounds good, thanks for the info!

[danner]

Werk, I just noticed that the ATM Pressure screen on the receiver has almost no resolution. I am using inHg.

[werk_ag]

I understand what you mean, we need an extra decimal place to increase the resolution. I will see what I can do about this.
Its good having someone using imperial units to help spotting things like this.

Regards

[danner]

Managed to get cumulus mx running on one of my rpi3's to upload to my webspace. Pretty cool!

WeatherDuino weather website

[werk_ag]

Well done, that usually is the most tricky part.
To complete the good news, I can also confirm you that I already did the required changes to have two decimal places on the ATM Pressure graph. Its under test, but seems to be working well.
Changes will be included on next software release.

[danner]

Sounds good, thanks, Werk!

[werk_ag]

Managed to get cumulus mx running on one of my rpi3's to upload to my webspace. Pretty cool!

WeatherDuino weather website

When ready, you can update your profile with the url of your Meteo Station.

[danner]

done.

[werk_ag]

Thank you.
Now the mark on the map have a link to your weather station: Alma, MI USA

[danner]

I am very satisfied with the temperature performance so far. Compared to the local airport which is 3.5 miles south of me and 25ft lower in elevation my temperatures are close. The average temperature difference in the last 28 days is within .3deg F.

The airport gets slightly warmer during the day and slightly cooler at night, within the accuracy tolerance of the sensor (SHT31 is +/-0.3 C), so it looks like the placement of my temperature sensor is pretty good. It is only 28 days of data, but it looks good to me so far.