03-03-2017, 09:58
It should be something simple that we are not seeing right now...
Cumulus is just unsuccessful trying to access something...
It may help if you can tell from what software version you tried the upgrade.
Upgrading from some older software versions, may require that you do a "factory reset". Remove the USB cable, and press the push button for 5 seconds. The unit should reboot two times, after that follow the LCD indications, connect the USB cable and try to start Cumulus.
Do you have any memory about having had any problem related with the I2C address of the RTC module when you originally assembled your system (something like it having a non standard address)? I'm just trying to figure some possibilities.
Quote:Its strange, almost like its too busy keeping up the data to the Computer to be able receive any wireless transmissions if that makes sense.
Cumulus is just unsuccessful trying to access something...
It may help if you can tell from what software version you tried the upgrade.
Upgrading from some older software versions, may require that you do a "factory reset". Remove the USB cable, and press the push button for 5 seconds. The unit should reboot two times, after that follow the LCD indications, connect the USB cable and try to start Cumulus.
Do you have any memory about having had any problem related with the I2C address of the RTC module when you originally assembled your system (something like it having a non standard address)? I'm just trying to figure some possibilities.