01-02-2017, 16:55
(This post was last modified: 01-02-2017, 16:56 by AllanG.
Edit Reason: additional information
)
Today I completed construction of my PLUS RX and after testing as very helpfully suggested by Wizza here:
http://www.meteocercal.info/forum/Thread...ild?page=4
I added the necessary modules - rtc, wireless rx, etc., and successfully started it up. Everything seems to be working as it should, there's just one very minor point - on the "tx info" screen, the tx battery volts continually reads 0.0 although the case temperature and fan state show correctly. (I do have "send hardware status" enabled in the tx software.)
I wonder if anyone else has seen this or is there something (very probably
) that I've missed...
Allan.
Edited to add that I do of course have the latest software running on both tx and rx!!
http://www.meteocercal.info/forum/Thread...ild?page=4
I added the necessary modules - rtc, wireless rx, etc., and successfully started it up. Everything seems to be working as it should, there's just one very minor point - on the "tx info" screen, the tx battery volts continually reads 0.0 although the case temperature and fan state show correctly. (I do have "send hardware status" enabled in the tx software.)
I wonder if anyone else has seen this or is there something (very probably
) that I've missed...Allan.
Edited to add that I do of course have the latest software running on both tx and rx!!