Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New Station nearly up and running
#3

All those settings are as they should be...It is not a big problem, just curious why this is happening
Everything else works well so far, and the RF efficiency is about 80 - 85% over about 50 metres and through 2 walls.
Hoping to site the TX about 100 metres away in the middle of a field.

Just checked the web interface of the RX, SRAD is 58093 W/m2 and UV is 5809.3....very similar numbers...something odd going on!

Tom
Reply


Messages In This Thread
New Station nearly up and running - by heebyjeeby - 10-06-2018, 21:26
RE: New Station nearly up and running - by hornychz - 11-06-2018, 11:28
RE: New Station nearly up and running - by heebyjeeby - 11-06-2018, 14:00
RE: New Station nearly up and running - by t3gathome - 11-06-2018, 15:13
RE: New Station nearly up and running - by werk_ag - 11-06-2018, 17:44
RE: New Station nearly up and running - by werk_ag - 11-06-2018, 17:23
RE: New Station nearly up and running - by engolling - 11-06-2018, 18:15
RE: New Station nearly up and running - by werk_ag - 13-06-2018, 22:02
RE: New Station nearly up and running - by heebyjeeby - 11-06-2018, 23:02
RE: New Station nearly up and running - by werk_ag - 13-06-2018, 22:04
RE: New Station nearly up and running - by heebyjeeby - 13-06-2018, 22:53
RE: New Station nearly up and running - by werk_ag - 14-06-2018, 02:14
RE: New Station nearly up and running - by heebyjeeby - 14-06-2018, 14:35
RE: New Station nearly up and running - by werk_ag - 14-06-2018, 17:22
RE: New Station nearly up and running - by heebyjeeby - 14-06-2018, 22:24
RE: New Station nearly up and running - by werk_ag - 15-06-2018, 02:30
RE: New Station nearly up and running - by heebyjeeby - 23-06-2018, 23:00
RE: New Station nearly up and running - by werk_ag - 24-06-2018, 01:06
RE: New Station nearly up and running - by heebyjeeby - 15-07-2018, 22:38
RE: New Station nearly up and running - by hornychz - 16-07-2018, 00:09
RE: New Station nearly up and running - by werk_ag - 15-07-2018, 23:25



Users browsing this thread: 1 Guest(s)