20-03-2018, 22:25
PCBs are in production.
In principle I have a programmable RS232 to I2C converter to read the laser ranging device and emulate an I2C temperature sensor.
This is how the board will look like:
![[Image: y4mAbpYo315Zplsz45RvZQstdge4hX9GukRgfyAu...pmode=none]](https://ddp5fw.bn.files.1drv.com/y4mAbpYo315Zplsz45RvZQstdge4hX9GukRgfyAubw1sJDVzkiI07g8cGEaQST5PvR00-Lt4YleYAXefrSP21RA7zBDbzG6Nm4xUV0Eqx1ifVkURbF7inUcVf1sJBAwQAIjxmurLYc9YCsuoEVdEibMvjNXo2_0ERqnAhpZi1SPjrS8TSRMmXVIBRWbHEaDxLKadB_hQExZZKoUzRkbrnq6DA?width=696&height=1024&cropmode=none)
At the moment I have a device driver for the following lasers:
- HOLO NSCE NS-XX (http://www.shhongle.com/Pro_show.asp?id=9)
- HIREED Laser (https://www.aliexpress.com/wholesale?spm...2793950499)
-SNDWAY Lasers which are very spread could be supported thanks to Michael. This laser was my first try and I failed, but this guy got it hacked
https://www.mictronics.de/2018/02/laser-...eter-hack/
So if someone wants to test the laser measurement, I will give away some test PCBs without parts for shipping and a small handling fee of 3 EUR (if the PCBs work...
)
In principle I have a programmable RS232 to I2C converter to read the laser ranging device and emulate an I2C temperature sensor.
This is how the board will look like:
At the moment I have a device driver for the following lasers:
- HOLO NSCE NS-XX (http://www.shhongle.com/Pro_show.asp?id=9)
- HIREED Laser (https://www.aliexpress.com/wholesale?spm...2793950499)
-SNDWAY Lasers which are very spread could be supported thanks to Michael. This laser was my first try and I failed, but this guy got it hacked

https://www.mictronics.de/2018/02/laser-...eter-hack/
So if someone wants to test the laser measurement, I will give away some test PCBs without parts for shipping and a small handling fee of 3 EUR (if the PCBs work...
)

