[werk_ag]

I did not read it carefully and put 30 instead of 20 for the davis unit (old habits die hard) now compiles and uploads OK.
I upgraded my spare Tx board and hope to have the time to swap it later this week.A couple of questions;

Then, don't forget that on first use you should manually rotate your wind vane several times, as stated on the upgrade notes.

The extra green dot to the right of the time display, what does it indicate?

Green - Your software is up to date.
Yellow - There is a new software version available

I see it now reports the IP address (great idea) but in my case it is wrong.

No, it doesn't report the IP address, there is no need to do it, when the server is contacted he knows the IP from where the request is done.
Instead what is sent, its an ID that must be unique, that's obtained from the mac address of the WiFi module.
The info that is sent to the WeatherDuino server, in the long term, will allow us to build a map of all WeatherDuino Pro2 PLUS stations that are effectively alive, which will be a lot more useful to all of us than the current map we already have.

Your stations (I believe they are two) are reporting very well. It would be very nice if you could change the default weather station name (Meteocercal) to your own weather station name (see your RX user config file).

Regards