[Steve1506]

Can anyone advise me how frequent the TX LED on the RX pro plus RX will flash when running in test mode

Steve D

Hi Steve

There isn't any fixed frequency for the blink of the TX LED. If you have the Relay_Data function active, the TX LED will blink every time you receive a data packet from any TX unit.
The wind data is transmitted every 3 seconds, so it should blink more or less at each 3 seconds, some times more frequently.

Thanks for the info,  I am going to need to progress some more as I have yet to build a TX unit to confirm everything is good. The fact that I do get an indication although around 30secs or so it does show that at least the drive circuit is working.

Steve D