12-09-2017, 03:48
Cumulux MX
Settings -> Calibration Settings -> Multipliers -> Rainfaill
Multiplier = Bucket Type / 0.2 - Yours is a 0.01"=0.254mm
Multiplier = 0.254 / 0.2 = 1.27
Weather stations send to the software the number of tips occurred, not a value. With a multiplier of 1, Cumulus counts each tip as 0.2mm of rain (default for metric Davis weather stations), so for a 0.254 rain gauge a multiplier of 1.27 is needed.
Settings -> Calibration Settings -> Multipliers -> Rainfaill
Multiplier = Bucket Type / 0.2 - Yours is a 0.01"=0.254mm
Multiplier = 0.254 / 0.2 = 1.27
Weather stations send to the software the number of tips occurred, not a value. With a multiplier of 1, Cumulus counts each tip as 0.2mm of rain (default for metric Davis weather stations), so for a 0.254 rain gauge a multiplier of 1.27 is needed.

