[werk_ag]

Hello Werk_AG,

I need some infomations about parts not mentioned in your part list :

1. C1 and R1 also the fan control D1, R2 and T1 are only needed if you use a Sharp sensor.
2. R12 (value 0R on the shematics 5K?), C4, C5 and IC3 for AREF.

Pierrelux

Hi Pierrelux,

Yes, that's right. All those parts are only needed for the SHARP version. The AQM board is supplied with all the parts needed to work with the PMS7003, already installed.

Regards