03-06-2017, 04:56
I have assembled board Tx1 with the FO wind and rain sensors and am trying to upload the software to it. I made the changes to config_TX and it errors out with this message. 'Internal' was not declared in this scope.
The following is the entire error message.
Arduino: 1.8.2 (Windows 7), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
C:\Users\Dan\Documents\Arduino\WeatherDuino_Pro2_PLUS_v2.1_20170528\WeatherDuino_Pro2_PLUS\v2.1\software\TX software\WeatherDuino_Pro2_Universal_TX_v3.1_b002\Process_IDx.ino: In function 'void send_SensorID5()':
Process_IDx:363: error: 'INTERNAL' was not declared in this scope
analogReference(INTERNAL); // Sets Analog Reference to 1.1V
^
Multiple libraries were found for "EEPROM.h"
Used: C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\EEPROM
Not used: C:\Users\Dan\Documents\Arduino\libraries\EEPROM
exit status 1
'INTERNAL' was not declared in this scope
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
First I copied the libraries from C:\Users\Dan\Documents\Arduino\libraries\EEPROM and pasted them to C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\EEPROM and I tried it again and got the same "'Internal' was not declared in this scope." I then deleted the EEPROM library from C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\ and tried it again and got the same error.
Arduino: 1.8.2 (Windows 7), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
C:\Users\Dan\Documents\Arduino\WeatherDuino_Pro2_PLUS_v2.1_20170528\WeatherDuino_Pro2_PLUS\v2.1\software\TX software\WeatherDuino_Pro2_Universal_TX_v3.1_b002\Process_IDx.ino: In function 'void send_SensorID5()':
Process_IDx:363: error: 'INTERNAL' was not declared in this scope
analogReference(INTERNAL); // Sets Analog Reference to 1.1V
^
exit status 1
'INTERNAL' was not declared in this scope
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
When that didn't work I did a search and the person reinstalled IDE so I did that. Unfortunately I got the exact same message. Any insight?
The following is the entire error message.
Arduino: 1.8.2 (Windows 7), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
C:\Users\Dan\Documents\Arduino\WeatherDuino_Pro2_PLUS_v2.1_20170528\WeatherDuino_Pro2_PLUS\v2.1\software\TX software\WeatherDuino_Pro2_Universal_TX_v3.1_b002\Process_IDx.ino: In function 'void send_SensorID5()':
Process_IDx:363: error: 'INTERNAL' was not declared in this scope
analogReference(INTERNAL); // Sets Analog Reference to 1.1V
^
Multiple libraries were found for "EEPROM.h"
Used: C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\EEPROM
Not used: C:\Users\Dan\Documents\Arduino\libraries\EEPROM
exit status 1
'INTERNAL' was not declared in this scope
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
First I copied the libraries from C:\Users\Dan\Documents\Arduino\libraries\EEPROM and pasted them to C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\EEPROM and I tried it again and got the same "'Internal' was not declared in this scope." I then deleted the EEPROM library from C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\ and tried it again and got the same error.
Arduino: 1.8.2 (Windows 7), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
C:\Users\Dan\Documents\Arduino\WeatherDuino_Pro2_PLUS_v2.1_20170528\WeatherDuino_Pro2_PLUS\v2.1\software\TX software\WeatherDuino_Pro2_Universal_TX_v3.1_b002\Process_IDx.ino: In function 'void send_SensorID5()':
Process_IDx:363: error: 'INTERNAL' was not declared in this scope
analogReference(INTERNAL); // Sets Analog Reference to 1.1V
^
exit status 1
'INTERNAL' was not declared in this scope
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
When that didn't work I did a search and the person reinstalled IDE so I did that. Unfortunately I got the exact same message. Any insight?