[werk_ag]

I have been updating my Pro2 PLUS with the latest software and I am having no luck with the screen saver, it just stays on all the time.
I have included the relevant portion of the config.h file.
Any ideas ?

Hi Jim,

Could you please give me more details? Perhaps it is working just as it should be.

With your config, after five minutes the display should change to the big clock, and then stay in that state until you touch anywhere on the screen. The backlight will never be automatically turned off.

If you want that the backlight will turn off automatically after a defined amount of time change this to 0 (zero), then the big clock will not be shown automatically.

Code:

#define Use_ScreenSaver           0    // Instead of turn off TFT backlight show a big clock screen. 0= No, 1= Yes

Now take note of this little feature: No matter how you have configured the behaviour of the screen saver feature, as long as you are on the main screen, at any time you change to the big clock, with a single touch on the top right of the display. Also, when the big clock is active you can turn off the backlight by just touching the top right of the screen.


Please let me know if my answer has helped.

Regards