05-03-2017, 20:36
Thank you for your answers.
I use the sensor only in the summer when I water the garden.
The depth of the well is 3m and the high level is 50cm from the ground, or 2.5m of water. The volume of water is 3m3. I empty it pretty quickly in summer but it fills up pretty quickly.
Apart from watering, I do not look at the water level, it is always sufficient for my daily needs.
I find this well integrated in the middle of other values displayed on the RX and WD.
It is known that this sensor seems to pose worries when it remains too long to moisture. So far, I have not encountered this problem.
http://www.dom-ip.com/wiki/R%C3%A9alisat...r_un_puits
spudstrawb, i will read your link tomorrow. Thanks.
I use the sensor only in the summer when I water the garden.
The depth of the well is 3m and the high level is 50cm from the ground, or 2.5m of water. The volume of water is 3m3. I empty it pretty quickly in summer but it fills up pretty quickly.
Apart from watering, I do not look at the water level, it is always sufficient for my daily needs.
I find this well integrated in the middle of other values displayed on the RX and WD.
It is known that this sensor seems to pose worries when it remains too long to moisture. So far, I have not encountered this problem.
http://www.dom-ip.com/wiki/R%C3%A9alisat...r_un_puits
spudstrawb, i will read your link tomorrow. Thanks.