Software Download and Verify
The very next step you should do is "check for latest WeatherDuino software"..!!!!!! Go to the following URL and check / download the latest release of WeatherDuino Pro2 PLUS software:
http://www.meteocercal.info/forum/Thread...st-Release
From the earlier testing (above in this thread) of your Mega2560 Pro Mini module you should already have your IDE software loaded on your computer and know what COM port the module is linked to on your computer. You should have a folder called "Arduino" located under your "My Documents" folder. Extract the zipped/compressed download into the folder. You should now have "My Documents\Arduino\WeatherDuino_Pro2_PLUS". Browse down to the v1.0 folder and copy the contents of the "Library" folder to your "My Documents\Arduino\Libraries" folder.
Now launch your IDE software and open:
"H:\My Documents\Arduino\WeatherDuino_Pro2_PLUS\v1.0\software\RX software\
WeatherDuinoPro2Plus_RX_v100_b017\WeatherDuinoPro2Plus_RX_v100_b017.ino" file
Click the "Verify" Button and all should go through with no errors - DON'T UPLOAD JUST YET..!!!!!
If you got this far with no errors, well done, and next we need to set the "user options" in the WeatherDuino RX software.
The very next step you should do is "check for latest WeatherDuino software"..!!!!!! Go to the following URL and check / download the latest release of WeatherDuino Pro2 PLUS software:
http://www.meteocercal.info/forum/Thread...st-Release
From the earlier testing (above in this thread) of your Mega2560 Pro Mini module you should already have your IDE software loaded on your computer and know what COM port the module is linked to on your computer. You should have a folder called "Arduino" located under your "My Documents" folder. Extract the zipped/compressed download into the folder. You should now have "My Documents\Arduino\WeatherDuino_Pro2_PLUS". Browse down to the v1.0 folder and copy the contents of the "Library" folder to your "My Documents\Arduino\Libraries" folder.
Now launch your IDE software and open:
"H:\My Documents\Arduino\WeatherDuino_Pro2_PLUS\v1.0\software\RX software\
WeatherDuinoPro2Plus_RX_v100_b017\WeatherDuinoPro2Plus_RX_v100_b017.ino" file
Click the "Verify" Button and all should go through with no errors - DON'T UPLOAD JUST YET..!!!!!
If you got this far with no errors, well done, and next we need to set the "user options" in the WeatherDuino RX software.

