21-01-2017, 10:17
Lets check some settings Mike, and just expanding on Werk's thoughts as this came to mind for me also. Connect to CumulusMX on your Raspi via web-browser, on one of your home computers - http:\\Raspi_ip_address_here:8998 - eg: http:\\10.1.1.12:8998
The CumulusMX GUI should come up in the browser.
Then at the top of the CumulusMX GUI, look for Settings, then Station Settings. Can you confirm that the station type is set to Davis Vantage Pro..???
Then browse down a little further in settings and look for the comm port ID (serial port name). Is it set to - /dev/ttyUSB0..???
Mark R
The CumulusMX GUI should come up in the browser.
Then at the top of the CumulusMX GUI, look for Settings, then Station Settings. Can you confirm that the station type is set to Davis Vantage Pro..???
Then browse down a little further in settings and look for the comm port ID (serial port name). Is it set to - /dev/ttyUSB0..???
Mark R