28-11-2014, 12:35
Quote:I assume they are the 2 two holes to the left of the SWT in the photo above. I can see VP2 is not in use as in the Parts list so I assume the one next to SWT is VP1 and it is the On/OFF switch.
Yes VP1 is next to the SWT (which is display mode button). VP1 is the programming jumper you need it in place to stop resets when communicating to Cumulus over the USB connection. You only remove this jumper when programming the unit.
VP2 IIRC is the jumper you need on only if you are using the easyweather dat file format.