15-09-2016, 03:41
(14-09-2016, 13:02)zitoune Wrote: Try to have the TX and RX in sight, a few meters away for example. The metal roof between the two might act as a shield..
also with no rain you can simulate by activating manually the sensor in your rain collector (open it and move the contact in front of the magnet).
Werk,
I have found the issue; as I suspected the Tx module was faulty and I have temporarily put a old one I had with an incorrect pinout into service until new ones arrive. Had to do a bit of adaption but immediately it came to life.
When it first started the Rx led wasn't flashing and the "artificial rain" from a bottle of water didn't update. I re-orientated the Tx antenna to horizontal and the "rain" downloaded and the Rx led now flashes as expected.
Thanks for all your replies
Regsrds
Jim[attachment=755]

