[JT118]

Here is mine, installed on TX1 (TX0 with rain gauge, anemometer etc)

Needs a lot of tidying up , but it is working. (NB picture shows Leaf wetness and soil moisture sensors incorrectly connected, Soil Moisture should be Ground, bare; 5V, Red and ADC1, Black. Leaf Wetness should be Ground, Bare; 5V, White; and ADC2, Red.)

   

   

As near as possible to get to this:

   

===================================
Soil Temp; 4 of 1Wire Dallas DS18B20 sensors buried at:

-1 metre
-30cm
-10cm
and at Grass level

+ 1 SHT10 in Radiation shield at + 1m above grass.

Analog Input 1: VH400 soil Moisture

Analog Input 2: Decagon Leaf Wetness

All working and reporting as required.