[Palmyweather]

Thanks for your replies

Please find attached some photos of my solar radiation enclosure. It will look familiar as I re-worked the Find Offset WH1083 solar panel enclosure to house the panel and UV sensor. I used sound dampening mat to support the panel and UV sensor up against the clear plastic of the original enclosure. The circuit board mounted tidily underneath this. The enclosure is vented as well to prevent heat build up as I did not seal the original holes left behind in the bottom of the enclosure.

I do notice in taking photos tonight, the washer spacers I used to assist with supporting the UV sensor under the enclosure has moved over the corner or the panel.

I am unsure what this clear plastic is made of and do not have my vernier callipers with me to measure the thickness at this stage.

I think maybe a redesign is necessary and I will try to hunt down something glass like that I can adapt for this project. Just find the readings odd with the difference between a clouded day and a clear sky day.

Thanks for your help and I will let you know how I get on when I find something more suable as a housing.