06-11-2015, 01:19
Hi Werk,
I upgraded from WeatherDuino_RX_v1.4_b037 to v1.5_b013. Please find attached the configuration file as requested. Renamed as forum would not allow the native file name.
This is the I2C Scanner output:
I2C Scanner
Scanning...
I2C device found at address 0x27 !
I2C device found at address 0x57 !
I2C device found at address 0x68 !
I2C device found at address 0x77 !
done
Since putting the v1.5_b013 on there has been no cumulative rain total on the Rx display. It reports 0 days since last rain during rain and right after instead of how many mm. Also I can confirm now that it is past 9am my meteorological day, that the days since last rain counter is behind one day as it still says 0 days.
The rainfall amount is otherwise being passed to the weather station software as usual.
I upgraded from WeatherDuino_RX_v1.4_b037 to v1.5_b013. Please find attached the configuration file as requested. Renamed as forum would not allow the native file name.
This is the I2C Scanner output:
I2C Scanner
Scanning...
I2C device found at address 0x27 !
I2C device found at address 0x57 !
I2C device found at address 0x68 !
I2C device found at address 0x77 !
done
Since putting the v1.5_b013 on there has been no cumulative rain total on the Rx display. It reports 0 days since last rain during rain and right after instead of how many mm. Also I can confirm now that it is past 9am my meteorological day, that the days since last rain counter is behind one day as it still says 0 days.
The rainfall amount is otherwise being passed to the weather station software as usual.