24-10-2015, 09:28
Hi,
If the dc supply voltage (particularly on the receiver module and nano) is the same under all 3 conditions (Main Power supply, USB and both) then I'd still be looking for RFI. Maybe the PSU and USB are "fighting" each other, or maybe one cable is acting as an "antenna" (a known issue with some of the Fine Offset Consoles).
Can you try a different USB supply: Perhaps a separate "mains adapter/charger", or another PC? The nominal USB power supply voltage is 5 volts, often it's higher (around 5.5 v) but it might be as low as 4.5 volts.
Cheers, Alan.
If the dc supply voltage (particularly on the receiver module and nano) is the same under all 3 conditions (Main Power supply, USB and both) then I'd still be looking for RFI. Maybe the PSU and USB are "fighting" each other, or maybe one cable is acting as an "antenna" (a known issue with some of the Fine Offset Consoles).
Can you try a different USB supply: Perhaps a separate "mains adapter/charger", or another PC? The nominal USB power supply voltage is 5 volts, often it's higher (around 5.5 v) but it might be as low as 4.5 volts.
Cheers, Alan.

