17-07-2015, 10:08
Here we go again - inside the RX box
Similar to the RX, the PCB is fixed at the bottom of the box with 2 screws glued.
![[Image: IMG_3828.JPG]](http://oaphotographies.com/weatherduino/images/IMG_3828.JPG)
The temp sensor is glue through a square shaped hole:
![[Image: IMG_3829.JPG]](http://oaphotographies.com/weatherduino/images/IMG_3829.JPG)
The whole box with the LCD - is is cramped inside its hole with no glue.
Similar to the RX, the PCB is fixed at the bottom of the box with 2 screws glued.
The temp sensor is glue through a square shaped hole:
The whole box with the LCD - is is cramped inside its hole with no glue.

