23-06-2015, 02:01
It seems so 
Have you checked the chip orientation?
On the board, pin 1 is on the top left marked with a small circle. AT45DB011D-SSH-B chips, usually have PIN 1 marked with a small triangle on the top side.
Also check the welding at each pin. With care, reheat them again.

Have you checked the chip orientation?
On the board, pin 1 is on the top left marked with a small circle. AT45DB011D-SSH-B chips, usually have PIN 1 marked with a small triangle on the top side.
Also check the welding at each pin. With care, reheat them again.

