05-06-2015, 16:49
I have the RTC connected, but unfortunately mine came without a battery. I'll pick up one tomorrow. I did discover that a double click gave me the system information for the TX. I'll build the TX tomorrow and hopefully with the battery, That will solve my issues.
I'm also seeing the issue where plugging in the USB causes a reboot. I have a jumper installed on VP1.
Opening the serial monitor in the Arduino software causes a reboot as well.
I've checked the connectivity of the VP1 pins to reset and R7. I haven't at this point checked that I see the 5v on the VP1 pin as its currently 01:49am.
I'm also seeing the issue where plugging in the USB causes a reboot. I have a jumper installed on VP1.
Opening the serial monitor in the Arduino software causes a reboot as well.
I've checked the connectivity of the VP1 pins to reset and R7. I haven't at this point checked that I see the 5v on the VP1 pin as its currently 01:49am.
Chaos Manor Weather
Mount Evelyn, Australia
http://www.sdsnet.net/weather/cumulus/indexframe.htm
LaCrosse WS-2300, until I have a Weatherduino Pro2 running.