I'm having an issue with my 4Pro receiver, it crashes and will not restart unless I unplug the power, the reset button has no effect. The current set up is receiving power from a raspberry pi over the micro usb port - I've set up cumulus on the raspberry pi and use the usb connection for both data and power.
Any guesses? I'm wondering if it is a hardware issue? I'm on the latest firmware build,
Thanks you in advance!
Zac
Edit 4/15/25: Today it was showing the 'not receiving data' error screen but the web interface was still showing up to date data, then a few minutes later the screen is not displaying anything or responding to touch but the web interface is still up to date, a few minutes after that the web interface is now down. No response when I press the reset button on the back, but it will reset when i unplug the usb power.
Edit 4/17/25: Again a blank screen and unresponsive to touch, webserver not online BUT the graph on cumulus shows it was receiving data, i.e. no flat spots, possibly it had just happened, had to unplug the usb to restart the receiver.
Edit 4/26/25: I've discontinued using the RPI, not sure if it had anything to do with my issues but it wasn't booting after I cycled the power so now power is coming directly to the receiver via the USB port. It is still crashing most days but I can reset it with the button on the receiver, so strange. Really not sure what to do but it is frustrating how often it freezes up, could it be a power supply issue? I've attached the current config.h as a .pdf
Any guesses? I'm wondering if it is a hardware issue? I'm on the latest firmware build,
Thanks you in advance!
Zac
Edit 4/15/25: Today it was showing the 'not receiving data' error screen but the web interface was still showing up to date data, then a few minutes later the screen is not displaying anything or responding to touch but the web interface is still up to date, a few minutes after that the web interface is now down. No response when I press the reset button on the back, but it will reset when i unplug the usb power.
Edit 4/17/25: Again a blank screen and unresponsive to touch, webserver not online BUT the graph on cumulus shows it was receiving data, i.e. no flat spots, possibly it had just happened, had to unplug the usb to restart the receiver.
Edit 4/26/25: I've discontinued using the RPI, not sure if it had anything to do with my issues but it wasn't booting after I cycled the power so now power is coming directly to the receiver via the USB port. It is still crashing most days but I can reset it with the button on the receiver, so strange. Really not sure what to do but it is frustrating how often it freezes up, could it be a power supply issue? I've attached the current config.h as a .pdf
