[HeavyWeather]

Hello all,

This is an edit to my post that I did earlier. I have more information on my issues and hope someone can help troubleshoot. When turning both the receiver and transmitter, with my debug on for the transmitter, I have noticed the following issues:
The temperature sensor intermittently works and doesn't work, but when tested on a separate system, it works just fine.
The Wind and Rain are sent first to the receiver, and after a few times the wind sensor sends, the rain amount jumps to 722.4 inches out of nowhere.
 

PHP Code:

RFM95 init done.
Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.00
  WindDir: 900  WindDirName: E

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.00
  WindDir: 900  WindDirName: E

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.00
  WindDir: 900  WindDirName: E

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 3.13
  WindDir: 2700  WindDirName: W

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 2.63
  WindDir: 900  WindDirName: E

Sending ID0...
  Sensor 0 - Temp: 0.00  Hum: 0.00
  Sensor 1 - Temp: 0.00  Hum: 0.00

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 1.37
  WindDir: 2250  WindDirName: SW

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.97
  WindDir: 900  WindDirName: E

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.00
  WindDir: 900  WindDirName: E

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.00
  WindDir: 900  WindDirName: E

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.00
  WindDir: 900  WindDirName: E

Sending ID3...
  Collector Type: 0.28
  Total Rain Tips: 0
  Total Rain: 0.000
  Rain Fall Tips /h: 0
  Rain Fall Rate mm/h: 0.00

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.00
  WindDir: 900  WindDirName: E

Sending ID0...
  Sensor 0 - Temp: 0.00  Hum: 0.00
  Sensor 1 - Temp: 0.00  Hum: 0.00

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.00
  WindDir: 900  WindDirName: E

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.00
  WindDir: 900  WindDirName: E

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.00
  WindDir: 900  WindDirName: E

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.00
  WindDir: 900  WindDirName: E

Sending ID2...
  WindAverage (m/s): 0.00  WindGust (m/s): 0.00
  WindDir: 900  WindDirName: E 


This is what I get in the monitor, and for some reason, it just stops altogether and hangs. could this be an issue with the wind sensor? It sends almost every second and even interrupts all of the other sensors it seems.  

Does anyone have any ideas on how to move further? I will also present pictures later tonight as well.

Thanks,
Michael