01-03-2023, 16:55
Werke that is a good question, looking at the temperature chart in Cumulus the indoor temp is flat as well! It is the yellow line:
Since that is being recorded at the receiver it must not be a radio issue, clearly it's a wifi issue with my house network! Seeing the rf efficiency number go up and down made me assume that was the cause, I just updated to the latest firmware and although it started out in the single digits after the reboot it is climbing, currently in the mid 30's after about ten minutes. I dont have any flat spots in the last three days that cumulus displays and I don't know how to look at data older than that, other wise I could check and see if the wind is also dropping out.
Thanks for trying to help, funny just a simple suggestion makes the issue crystal clear!
The receiver has been sitting unhoused since I got the system operational, my plan is to put it in an enclosure with a ups and the raspberry pi that hosts cumulus, then change the connection between the two from wifi to usb, that way I'm not relying on my network.
On another issue, we got a strong wind gust a couple of days ago, Cumulus recorded 45 mph but my weather underground page shows 69 mph? Looking at the other local stations my gust number is an anomaly, temperatures and other data are normal.
Cheers, and thanks!
Zac
Since that is being recorded at the receiver it must not be a radio issue, clearly it's a wifi issue with my house network! Seeing the rf efficiency number go up and down made me assume that was the cause, I just updated to the latest firmware and although it started out in the single digits after the reboot it is climbing, currently in the mid 30's after about ten minutes. I dont have any flat spots in the last three days that cumulus displays and I don't know how to look at data older than that, other wise I could check and see if the wind is also dropping out.
Thanks for trying to help, funny just a simple suggestion makes the issue crystal clear!
The receiver has been sitting unhoused since I got the system operational, my plan is to put it in an enclosure with a ups and the raspberry pi that hosts cumulus, then change the connection between the two from wifi to usb, that way I'm not relying on my network.
On another issue, we got a strong wind gust a couple of days ago, Cumulus recorded 45 mph but my weather underground page shows 69 mph? Looking at the other local stations my gust number is an anomaly, temperatures and other data are normal.
Cheers, and thanks!
Zac